Getting Started

Connecting to Admin Web Interface
Once a client computer has been connected via a wired or wireless connection, you can access the admin web interface by going to the Zodiac WX’s default IP ...
Tue, 2 Jan, 2018 at 2:06 PM
Physically connecting the Zodiac WX
To connect the Zodiac WX to your network you will need to: Connect the WAN port of your Zodiac WX to the LAN port of your existing Modem / Router using t...
Tue, 2 Jan, 2018 at 1:57 PM
Restoring factory settings
To restart the Zodiac WX simply press and release the reset button on the back of the device.  To reset the Zodiac WX to the default factory settings press...
Tue, 2 Jan, 2018 at 9:09 AM
Connecting to the default wireless networks
By default OpenFlow is disabled so you can connect to the Zodiac WX through a wireless connection without the need for a OpenFlow Controller. The Zodiac WX ...
Tue, 2 Jan, 2018 at 9:15 AM
Changing Admin password
Once you have logged in to the Zodiac WX navigate to System > Administration and enter the new password. Press SAVE & APPLY to save the new password ...
Tue, 2 Jan, 2018 at 2:07 PM
Setting the LAN IP address
To change the IP address of the Zodiac WX, go to: Network  >  Interfaces Select Edit on the LAN interface, and modify the IPv4 address accordingl...
Tue, 2 Jan, 2018 at 2:07 PM
Setting the WAN IP address
To change the WAN IP address of the Zodiac WX, go to: Network  >  Interfaces. Click Edit in the WAN interface section. The interface protocol sho...
Tue, 2 Jan, 2018 at 2:06 PM
Changing the network SSID and password
To change the wireless configuration of the Zodiac WX, go to: Network > Wireless Select EDIT for the desired network. radio0 refers to the 5 GHz n...
Tue, 2 Jan, 2018 at 2:12 PM
Updating the firmware
Obtain the latest firmware from the Northbound Networks Forum To update the firmware of the Zodiac WX, go to: System > Firmware Click on Choose F...
Tue, 2 Jan, 2018 at 2:17 PM